These images were saved in the gif format so they will take a little longer
to download.
CAD drawing
of the Trivial Pursuit horn. Plans for this airplane are available from PAMPA
products.
CAD drawing
of the horn that will work on the BLUE MAX by Kaz Minato or IMPACT by Paul
Walker. Can be used on other airplanes with the same geometry in the control
system.
CAD drawing
of the dog leg slider horn. The slider adjustment of this horn is between 1
1/16 inch on the high side to 1/2 inch on the low side. If you are coming from
the flap horn at 1 inch then you will probably not adjust this horn past 1 inch.
The horn is almost always adjusted towards the low side.