Laser Horn Dimensions
 Home FAQ What's New
Home
Carbon Fiber Bellcrank
Carbon Gear
Control Horns
Lasercut Horns
Laser Horn Dimensions
Foam Wings
Building Tips
Resins and Materials
PVA Mold Release
Hi-Temp Prop Mold
FAI Team Trials
Links
Kid Venture
FCM
Pictures 1
Pictures 2
Picutres 3
Pictures 4
Pictures 5
Pictures 6

 

 

 

 

Laser Horn DimensionCAD drawing of the Trivial Pursuit horn. (Plans for this airplane are available from PAMPA products)
Laser Horn DimensionCAD drawing of the horn that will work on the  BLUE MAX by Kaz Minato or IMPACT by Paul Walker. Can be used on other airplanes with the same geometry in the control system.
Laser Horn DimensionCAD drawing of the dog leg slider horn. The slider adjustment of this horn is between 1 1/16 inch on the high side to 1/2 inch on the low side. If you are coming from the flap horn at 1 inch then you will probably not adjust this horn past 1 inch. The horn is almost always adjusted towards the low side.

 

 
 
 

 

fbcounterleft.gif (1012 bytes)

Hit Counter

fbcounterright.gif (1065 bytes)

Web site managed by Dan Winship.
Copyright © 2002 Winship Models. All rights reserved.
Revised: August 31, 2003.

Back Home Next